Search
Blogging from Sydney | Australia
Some past thoughts
« Awesome Six Dogs Comment & Sydney Housing = Insane, Crisis, Ponzi | Main | Graduation Congratulations! »
Monday
May062013

A new, custom 2.78m desk for an eyefinity setup and more 

A few more illustrative photos are on Google+, for those who prefer the visual summary.

The problem

In the Christmas holidays of 2011, I realised something. I had a more or less standard 1.35m x 0.75m x 0.73m (WxDxH) study desk. It sucked.

Cluttered: Two PCs and a Macbook Air

So c. 18 Dec 2011, I decided to change that.

I think I needed something that could capture a few user stories well:

  • I have up to 3.15m to work with. Why not use it?
  • Potential for an Eyefinity / Surround setup
  • The full depth of the desk felt like wasted space (it's been a long time since CRT monitors were common)
  • I still tinker with my PCs frequently
  • I thought I could use the space far more efficiently, e.g. space under the drawers was barely used - an accessible shelf would be nice for say a few Raspberry Pi(s) and a game console or two
  • I'd grown used to having 3+ drawers
  • I don't care about a bunch of things like wheels or height-adjustability

Designing and planning the solution

Firstly, some constraints. Being six floors up makes taking things in through the window nearly impossible. That leaves the fire stairs and the elevator. Long story short, the elevator had the best potential - a little over 3m on the longest diagonal.

 
Early planning documents

Further 350mm is taken by a display for some of the trinkets I've acquired on my travels to places like the Great Barrier Reef, Coober Pedy, Lightning Ridge and Cradle Mountain. Hence we come to the first decision - the desk was to be about 2.8m long. Given that, I did some searching and there's really next to nothing out there that comes close, though the 2.4m kitchen benchtop idea is interesting. I had a choice:

  • Outsource it to a furniture builder
  • Capitalise on my woodworking prowess acquired primarily through my high school education, where I'd built a table out of radiata pine with a jarrah shelf and top. Though that was a Year 10 major project, and this was definitely going to be on a much larger scale...

I chose the latter and set about planning. The plans above capture the high level overview, but are missing many minor details. The devil is always in the details.

Details, details like drawers. Drawers make a table into a serious desk. They also add an extraordinary amount of complexity and intricacy. I wouldn't have gone forward with them if I needed to dovetail and build from scratch. Thankfully I discovered the BA[123]-M/W self-assemble drawers at Bunnings so I updated my plans to add some support rails.

BA3-M/W drawer between four posts and some rails

Iterative construction

Armed with my drawings and sketchup, I spent a small fortune on wood (though still a little less than three 24" Dell monitors cost) - cedar for the top (and drawer fronts I ended up replacing), and maple for the legs, lower shelf and rails. I chose cedar because it's a softwood and hence relatively light for the distance travelled (the jarrah used on my previous project made it heavier than it looked - even the removalists commented on it), and maple as something different to the arguably too common (though cheap and effective) radiata pine.

 
Left: Wood scouting. Right: Planning the dowel and biscuit locations for the 2.78m top piece

The other details all followed naturally from the above. For instance, given a need to go about 2.8m with a depth of about 600mm, I decided to biscuit-join three lengths (four pieces) of ~190mm cedar with a total end-to-end length of 8.4m. This also made my final depth closer to 570mm, which if anything has worked out even better, though practically quite close to the lower depth limit with my eyefinity setup.

Another point was the need to route many pieces to more easily achieve things such as the 8mm-rounded top, legs and rails. Using a router is always a challenge. There's consistently a need to test (the old adage measure twice cut once) - and plenty of offcuts went through it. The noise wouldn't be a problem back in a suburban house, but can be an issue in high-density urban living, generally restricting use of power tools to working hours. Fencing is a requirement too - indeed I'd often spend twice as long fencing as routing. However routing done right is almost always faster than chiselling.


Routing: Often complicated to ensure precision cuts and wood removed. Bottom left you can see a failed (and replaced) offcut being used as the rightmost supporting fence, part of the excavations to ensure the top fits snugly on the frame

Iterating on the design once I realised I wouldn't like the bare exposed rails
Unplanned, but expected: Chiselling out slots for the drawers

Frequent iterations (ctd): Replaced the prefabricated drawer fronts with cedar

Planning continued throughout the project, I remember a lot more doodles but just didn't have the foresight to take more photos

Final Results

Finished product

Designed to disassemble for transportation

Perspective: 2.64m back rail vs the height of my bedroom

The hidden stash works a charm at hiding things like power bricks and excess cable clutter

I'm loving it

A few things are still incomplete. My Logitech G930 broke, so I shall be looking for a new gaming keyboard in the near future. Sometime a little further off I'll be in the market for an affordable 4K TV, and the geeks out there will determine I'm not running a true Eyefinity yet (the right two monitors are running off the main box, I'm dedicating the left Eyefinity monitor to the Xbox 360 for now, and the leftmost monitor to my legacy Windows XP gaming rig). There are dreams of a watercooled project, subject to the many complexities of implementation...

Overall after a week with this setup, I am loving it. Well worth it for something that really nailed* what I wanted.

* ironically I used no nails, indeed the only pieces of metal in the entire solution are the drawer's rails, screws and handles. I'm not much of a metalworker, especially when it comes to MIG/TIG welding so I prefer to stick with my love of woodworking.

References (31)

References allow you to track sources for this article, as well as articles that were written in response to this article.
  • Response
    Astounding Nfl Jerseys - Least expensive Cost On Line
  • Response
  • Response
    NFL is genuinely a single of the most significant sports in America. It has a major following.
  • Response
    Nice Site, Carry on the good job. Many thanks.
  • Response
    Response: jlKIiFPY
    Peter Schmidt - Blog - A new, custom 2.78m desk for an eyefinity setup and more 
  • Response
    Peter Schmidt - Blog - A new, custom 2.78m desk for an eyefinity setup and more
  • Response
    Response: Hollister
    Peter Schmidt - Blog - A new, custom 2.78m desk for an eyefinity setup and more ,See artikkel on kirjutatud täpne aga kui sa tahad, et näha seotud artikleid saate vaadata infot siit:Hollister,
  • Response
    Response: Hollister
    Peter Schmidt - Blog - A new, custom 2.78m desk for an eyefinity setup and more ,Peter Schmidt - Blog - A new, custom 2.78m desk for an eyefinity setup and more ,Тази статия е написана точно Все пак, ако искате да видите статии, свързани можете да видите информацията тук:Hollister,
  • Response
    Thanks!My friend runs in both Numbus and Mizuno Creation and she s mobiaconsulting.com/nikefreeshoes.html aid the mobiaconsulting.com/salefreerun.html Creation has a roomier toe box. She did go up a 1/2 size though when she bought them. Many online stores have the "shoefttr" app that will shoe you where they might be tight at ...
  • Response
    Response: Read This method
    Peter Schmidt - Blog - A new, custom 2.78m desk for an eyefinity setup and more
  • Response
    Peter Schmidt - Blog - A new, custom 2.78m desk for an eyefinity setup and more
  • Response
    Response: Sushi Orlando
    Peter Schmidt - Blog - A new, custom 2.78m desk for an eyefinity setup and more
  • Response
    Peter Schmidt - Blog - A new, custom 2.78m desk for an eyefinity setup and more
  • Response
    Peter Schmidt - Blog - A new, custom 2.78m desk for an eyefinity setup and more
  • Response
    Peter Schmidt - Blog - A new, custom 2.78m desk for an eyefinity setup and more
  • Response
    Response: linkin park lyrics
    Peter Schmidt - Blog - A new, custom 2.78m desk for an eyefinity setup and more
  • Response
    Peter Schmidt - Blog - A new, custom 2.78m desk for an eyefinity setup and more
  • Response
    Response: Contractor leads
    Peter Schmidt - Blog - A new, custom 2.78m desk for an eyefinity setup and more
  • Response
    Response: Canon 5D Mark III
    Peter Schmidt - Blog - A new, custom 2.78m desk for an eyefinity setup and more
  • Response
    Peter Schmidt - Blog - A new, custom 2.78m desk for an eyefinity setup and more
  • Response
    Peter Schmidt - Blog - A new, custom 2.78m desk for an eyefinity setup and more
  • Response
    Peter Schmidt - Blog - A new, custom 2.78m desk for an eyefinity setup and more
  • Response
    Peter Schmidt - Blog - A new, custom 2.78m desk for an eyefinity setup and more
  • Response
    Peter Schmidt - Blog - A new, custom 2.78m desk for an eyefinity setup and more
  • Response
    Response: Marketing Online
    Peter Schmidt - Blog - A new, custom 2.78m desk for an eyefinity setup and more
  • Response
    Response: the full details
    Peter Schmidt - Blog - A new, custom 2.78m desk for an eyefinity setup and more
  • Response
    Peter Schmidt - Blog - A new, custom 2.78m desk for an eyefinity setup and more
  • Response
    Response: best dating sites
    Peter Schmidt - Blog - A new, custom 2.78m desk for an eyefinity setup and more
  • Response
    Response: essay writing
    An immediate response is needed to attempt the education problem every possible means to eradicate the worrying behavior from the child’s range on the notion that once entrenched.
  • Response
    咬口机,导槽机,剪板机,压瓦机,折弯机,c型钢机,复合板机,双层压瓦机,琉璃瓦机,彩钢瓦设备,卷帘门机,三层压瓦机,止水钢板机,角驰压瓦机,广告扣板机_金辉压瓦 咬口机 机械设备厂 > 产品中心 > 梯形屋面板成型机 > 梯形屋面板成型机25-210-1050型 105 剪板机 0型梯形屋面板成型机主要由进料导入平台、成型主机、成型剪切装置、液压站、电脑控制系统等几部分组成。生产的产品广泛应用于各种工业厂房、住房、仓库及简易钢棚屋面制作且 产品 压瓦机 信
  • Response
    沧州金辉压瓦机械设备厂 手 机: 沧州金辉压瓦机械设备厂 13832771638 15133711101 邮 箱:59458991@qq.com ...

Reader Comments (4)

Wow! So interesting to read about the process and the finished product is very smart and user friendly. Your Poppa S would be so proud. He loved his woodworking. Looking forward to seeing it first hand sometime soon. Judy

May 8, 2013 | Unregistered CommenterJudy

That looks stunning!

It must be a massive let-down coming into the standard set up at work :)

May 9, 2013 | Unregistered CommenterMo

modernes se regarder et se sentir grand.

March 23, 2014 | Unregistered Commentertnstore

Wow...this is something great and I'm sure it can bring a change in pattern so soon.

September 23, 2014 | Unregistered Commenterget help for essay writing

PostPost a New Comment

Enter your information below to add a new comment.

My response is on my own website »
Author Email (optional):
Author URL (optional):
Post:
 
Some HTML allowed: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <code> <em> <i> <strike> <strong>